Current Location: Home > Lubrication System > Medium pressure Lubrication Systems

Medium pressure Lubrication Systems

Date:2018-10-15Auto Engine Information Click:

           
     

LOW PRESSURE LUBRICATION SYSTEM

   

Medium pressure Lubrication Systems

 



Lubrication is defined as low pressure when an operating pressure of 2-3 bar is sufficient to allow oil to reach the moving surfaces. It is suitable for lubricating small and medium sized machines and is obtained with simple, compact, economic systems. Low pressure lubrication is particularly recommended for high precision machine tools (such as grinding and boring machines, lathes, etc.) in which lubrication must not alter the stability of the machine's slides and screws. The moving parts must be suitably prepared (see paragraph with diagrams and applications). The AZETA line includes manual and electric-cyclic volumetric pumps as well as vibration pumps. It is necessary to use resistive dosing valves as well as new and clean oil.view catalogue.


 

     

MEDIUM PRESSURE LUBRICATION SYSTEM

     

Medium pressure Lubrication Systems

 



Lubrication is defined as medium pressure when an operating pressure of 20-40 bar is used. It is suitable for large machines with many lubrication points, which may be a long way from each other. Medium pressure eliminates foreign matters and coolants from lubricated parts. Medium pressure entails using volumetric dosing valves operating at a set, constant volume of oil or fluid grease. The AZETA line includes volumetric pneumatic pumps and gear pumps.view catalogue.

 
     

AIR MIST LUBRICATION SYSTEM

     

Medium pressure Lubrication Systems

 



A minimal lubrication system operating on ultra low oil consumption. Compressed air is used as a carrier. Metered oil, suitably mixed with air, is conveyed in non atomised state to the lubrication point. AZETA AIR MIX is especially recommended for lubrication of high speed rolling contact bearings on spindles, electro-spindles and of rotating bushes of lathes with sliding headstock. For linear guides, the continuous flow keeps clean the tracks and races of balls or slides, as well as the contact races of rolling contact bearings.view catalogue.

 

     
         
       

AZETA
DISTRIBUTORS-DOSING VALVES-CONNECTIONS-ACCESSORIES

     

Medium pressure Lubrication Systems

 



Resistive dosing valves for low pressure 0,75-1-2-4-8-16 drops per minute 2-3-4-5-6 ways line distibutors/dividers 3 ways line divider Volumetric dosing valves for medium pressure 0,03-0,05-0,07-0,10-0,15-0,20-0,25-0,30 cm3 Straight terminal connection M 3x0,5 M 6x1,0 M 8x1,0 M 10x1,0 and 1/8"G 90° terminal connection M 3x0,5 M 6x1,0 M 8x1,0 M 10x1,0 and 1/8"G.view catalogue.

 

     
       
 

Lubrication Sys low pressure medium pressure air mix air-mix azeta

Copyright infringement? Click Here!